Please select one :
 Free Compound Sample Free Test Machine
* Certain terms and conditions apply. Free test machine available to those who are within the United States territory.
  Enter the CAPTCHA code
captcha

Proper Maintenance and Care for Dry/Low Moisture Carpet and Hard Floor Cleaning Machine

In order to extend the life of your CRB and ensure that it performs to the best of its capability please remember to maintain your machine properly with the following recommended steps:

  • Insert some grease between the bearing and the cover and also the bearing shaft entrance.
  • Make it a habit to remove the bearing cover every month to clean it up well with W-40 and make sure to dry it with compressed air and fit the cover together again.
  • Every 3 months, remove the gear cover and clean them in the same fashion and re-grease with white lithium grease.
  • Do not wash your machine; wipe it clean on every job.
  • If the dirt and mud dries on you, use a spray bottle and spray to moisten the dirt and wipe it clean with a dampened rag.
  • Make sure to use a dry rag in the finally wipe down stage.
  • Properly clean the brushes after all cleanings so that you avoid chemical and dirt build up. This can be done by washing the brushes in a 5 gallon bucket of water.